Halogen-Free Flame Retardant for PP

 PNPO is a Halogen-Free Flame Retardant , which develops its effectiveness through phosphorus/nitrogen synergism. When incorporated into polyolefine, it shows high processing stability and no migration.PNPO differs in its mode of action from halogenated flame retardants in the fire. When the polyolefine on exposure to flame, the carbon foam layer formed protects the polymer through its heat insulating effect to reduce further oxygen access and prevent dripping of the polymer. At the  same time there are no halogen hydride gases to cause.

Benefits

• Shows high processing stability in contrast to similar competitive material

• Particularly effective in thermoplastic polyolefins (e. g. polyolefin hotmelts), urethanes (e. g. integral skin foams, rigid foams, sealants), and epoxy resins (adhesives, sealants, structural laminates, gelcoats)

• Positive secondary fire effects such as low smoke density, lower formation of toxic smoke or corrosive gases

• Non-halogenated flame retardant with favorable environmental and health profile

Technical Data:

Appearance White free-flowing powder P content, % 24-27

1% TGA Temperature, °C ≥250

Average particle size, um D50≤15

PH value 5.0-7.5

Volatile,% ≤0.5

Whiteness ≥90.0

Solubility in water, 25°C , g/100mL H2O ≤0.5

Recommended dosage:

Remark: Oxide index reach 34% with dosage 25% in PP

Processing instruction:

1. The optimum conditions for incorporating should be determined in each individual case. Care must be taken to ensure homogeneous dispersion of all components.

2. Both single- and twin-screw extruders are suitable for incorporating the product. The temperature of the polymer melt should not exceed 230°C.

3. Choosing proper filler and control dosage .Normally ,the filler will reduct Flame retardant efficiency.

4. When a water bath is used for cooling the strands, it is advisable to keep the passage through the water bath as short as possible to permit optimum evaporation of any entrained water.

Package & Storage:

Net weight 25KG Kraft bag with PE liner.

It is not dangerous cargo .You should handle the material according to the instruction described on SDS.

Minimum shelf life is 12 months stored in a dry and ventilated warehouse.

The information presented herein is believed to be accurate and reliable, but is presented without guarantee or responsibility on the part of Novista Group and its  subsidiaries.  It is the responsibility of the user  to comply with  all licable laws and regulations and to provide for a safe workplace. The user should consider any health or safety hazards or information contained herein only as a guide, and  should  take those precautions which are necessary  or prudent to instruct employees and to develop work practice procedures in order to promote a safe work environment. Further, nothing contained herein shall be taken as an inducement or recommendation to manufacture or use any of the herein materials or processes in violation of existing or future patent.

Reference Formula:

Typical Application Data 1-1

Properties 1-2