Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
News
Home > News
PVC external lubricants from Novista Group
2018 / 07 / 03
Our TL-74, as the external lubricant during #PVC processing, is suitable for processing rigid/soft PVC granules, sheets, profiles, shrink films and calendered films. It offers improvement of non-tackiness, good release properties, good efficiency as a mould releasing agent with paste processing and also improved flowability. It can also reduce balancing torque and improve surface gloss. Dosage is about 0.3-0.8% (transparent) or 0.3-0.8% (opaque). (The using amount can be increased under special cases.)
PVC internal lubricants from Novista Group
2018 / 06 / 12
PVC lubricants can be divided into two categories. One is internal lubricant and the other is external lubricant. The internal lubricant can reduce in friction heat and melt viscosity, postpone gelation, improved flow charateristics. Our PVC Lubricant TL-60 /60A is based on neutral dicarboxylic acid ester of saturated fatty alcohols. It is a white or slight yellow debris or free-flowing powder, odourless. It can not be dissolved in water but dissolved in tributyl phosphate (TBP) and trichloromethane. Its melting point is 42-48°C, and flash point >225°C, volatility (96 hour/90°C) <1%.
Novista flame retardant-caring about fire safety worldwide
2018 / 06 / 09
According to the NFPA (National Fire Protection Association), in 2017, fire departments in the U.S. responded to a fire every 23 seconds. That same year, NFPA reported that firefighters responded to nearly 1.35 million fires, which resulted in 3,280 civilian fire fatalities, 15,700 civilian fire injuries and an estimated $14.3 billion in property loss--Fire accidents have been a serious problem threatening people's lives in The USA. And it is the same with the rest of the world. Novista Group Co. Ltd, as the leading flame retardant manufacturer from China, cares about fire safety worldwide. Novista provides FR solutions to: ABS, PE, PP, PBT/PET, PA6/66, PC, PC/ABS, PVC, HIPS, EPS/XPS, elastomers, epoxy resins, flexible and rigid PU foams, paints and coatings, textiles, adhesives, etc.
2018 / 06 / 06
(Novista - CPVC compound) CPVC is the acronym for chlorinated polyvinyl chloride, a type of construction pipe designed for fluid transport. And it is suitable for use with hot and cold potable water. CPVC is a thermoplastic produced from the chlorination of polyvinyl chloride (PVC) resin. This type of tubing is of a more flexible and heat resistant design than PVC tubing. The highest temperature can reach 110°C, the long-term use of temperature can reach more than 95°C. In appearance, CPVC is typically light-gray or yellow. Light-gray CPVC uses the nominal pipe sizing (NPS) system and yellow CPVC uses the copper tube sizing (CTS) system. CPVC is more expensive than PVC but cheaper than iron and copper. CPVC is largely resistant to the effects of acidic, alkaline, and inorganic chemicals. Due to its cost, heat-capacity, and chemical resistance, this plumbing is more properly suited for commercial/industrial applications.
replacement for brominated FRs (eg. DBDPE) and Sb2O3
2018 / 06 / 02
Today we'd like to introduce our new products, which can replace brominated FRs (eg. DBDPE) and Sb2O3, partly or totally. 1. ®RBP-20 (halogen-free, antimony-free, replace 20%-30% the dosage of halogenated FRs, eg. DBDPE) 2. ®RTP-50 (halogen-free, antimony-free, replace half the dosage of Sb2O3, very popular in Korean market now) 3. ®RTF-100 (completely replace Sb2O3) These replacement products can effectively reduce production cost when compared to the traditional pure "Bromine+Sb2O3" combination.
The advantages and applications of CPVC
2018 / 05 / 29
CPVC Resin, which is chloridized PVC, adopt the advanced suspension chlorination equipment after dehydration and desiccation and processed into white powder on the bases of our years producing experience. It has good chemical stability, excellent property of heat resistance, anti-flaming and low heat conductivity. CPVC Advantages: --Safety of potable water and long-term reliability --Resistance to corrosion, tuberculation, deposits --Chlorine and chloramine resistance --Lightweight, easy to transport --Available in wide range of sizes --Noise and water hammer resistance --No scrap value, avoiding jobsite theft --Durability and toughness to survive jobsite installations --No flame used for joining, solvent cement joints --Universal compatibility of pipes/fittings --Professional installed appearance
Welcome to visit us at NPE 2018!
2018 / 05 / 08
We cordially invite you to visit our booth at #NPE 2018: • Date: 2018.5.7-11, • Booth No.: S28118, • Place: Orlando, FL, USA. More details, please email to us or talk with me by --WhatsApp (+86 150 6536 1235), --Skype (ID: neil_novista). Looking forward to seeing you at #NPE2018 in Orlando!
Welcome to visit us at Chinaplas 2018!
2018 / 04 / 18
We cordially invite you to visit our booth at CHINAPLAS 2018: • Date: 2018.4.24-27, • Booth No.: 8.2Q09, • Venue: National Exhibition & Convention Center (NECC) in Hongqiao, Shanghai, China. We would like to make an appointment with you in advance. More details, please email to us or talk with me by --WhatsApp (+86 150 6536 1235), --Skype (ID: neil_novista). Looking forward to seeing you at CHINAPLAS in Shanghai!
SCO will be held in China in June of 2018
2018 / 03 / 28
East China's Qingdao City will host the Shanghai Cooperation Organization Summit in June this year, the provincial governor of Shandong said Thursday. "Shandong will take the opportunity to promote its international reputation," said Gong Zheng when delivering the government work report at the local parliamentary session. Shandong is the birthplace of many ancient Chinese thinkers, including Confucius. In 2017, its GDP exceeded 7.2 trillion yuan (about 1.1 trillion U.S.dollars). The summit has China, Russia, Kazakhstan, Kyrgyzstan, Tajikistan, Uzbekistan, India and Pakistan as full members. Novista-Reprint the News. Beijing: India for the first time took part in a meeting of the international military cooperation departments of the Shanghai Cooperation Organisation (SCO) since joining the bloc
Welcome to visit Novista on Chinaplas 2018 in Shanghai
2018 / 03 / 27
NOVISTA GROUP will attend CHINAPLAS 2018. • Date: 2018.4.24-27, • Booth No.: 8.2Q09. We would like to make an appointment with you in advance. More details pls email to sales06@novistagroup.com, or talk with me on WhatsApp (ID: +86 150 6536 1235) / skype (ID: neil_novista).
Brief introduction of CPVC resin for pipes grade and fittings grade.
2018 / 03 / 20
The CPVC (Chlorinated polyvinyl chloride ) resin is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white or canary loose grain or powder with no smell, odorless and innocuity. After chlorination, the irregularity of molecular bond of the #PVCresin and the polarity of molecular chain increase, the dissolvability and chemical stability of the resin also increase, and accordingly improve the heat resistance and resist the corrosion of acid, caustic, salt and oxidant etc. In addition, it improves the mechanical performance of numerical heat distortion temperature and chlorine content increases from 56.7% to 63-69% and Vicat softening temperature from 72-82˚C to 90-125˚C. Its highest service temperature can reach 110˚C and long-term service temperature can reach 95˚C. Accordingly, CPVC is one kind of advanced engineering plastic with vast foreground.
What is lead based one pack PVC stabilizer
2018 / 03 / 17
Lead based one pack PVC stabilizer in fact mainly including two parts, one is heat stbility system and lubricants system Heat stability system mainly faction by Tribasic lead sulfate(TBLS),Dibasic lead phosphite(DLP), lead stearate(LS), of couase also can use dibasic lead stearate(DBLS) Lubricants system, mainly faction by internalubricants such as calcium stearte,GMS, ESBO, and external lubricant such as pe wax, paraffin wax,F.T wax Good quality lead based one pack PVC stbilizer must think abaot this two system.Othervise can not work well. Only notice any one parts, the PVC Stabilizer not good Based on diffrent applicaitons, Lead based one pack PVC stabilizer divide to PVC stabilizer for pipe, sheet, panel, board,profiles, window, door, cable, shoes Usually one pack PVC stabilizer has excellent processing performance for calendaring molding. It will not effect the flatness, bright and clean, even thickness of the product when the filling material has a fluctuation. Usually no need added Lubricants alone. www.novistagroup.com PVC additive one-stop solution supplier Pls contact:
Novista gриглашает вас посетить на Chinaplas 2018 в Шанхае !
2018 / 03 / 16
Chinaplas - международная выставка пластмасс и резиновой промышленности. CHINAPLAS - это не только крупнейшая в Азии выставка пластмасс и резины, она также широко признана этой отраслью как 2-я наиболее влиятельная выставка в мире. Вы искренне приглашены на нашу стенд для Chinaplas 2018 от Novista Group. Вас ждут бесконечные возможности для бизнеса и большие сюрпризы! Экспонаты: хлорированный полиэтелен, вспомогательное вещество для акриловой обработки, термостабилизатор, хлорированный поливинилхлорид, огнестойкий Дата: 2018.4.24-27 Название компании: Novista Group Co., Limited Номер стенда: 8.2Q09. Было бы очень приятно встретиться с вами на выставке. Надеюсь, мы сможем создать возможность сотрудничать с вами в ближайшем будущем.
Brief introduction of Non-Toxic Ca Zn Stabilizer (Calcium Zinc PVC Stabilizer)
2018 / 03 / 14
Non-Toxic Ca Zn Stabilizer (Calcium Zinc PVC Stabilizer) are mainly used for pvc wire & cable. It is produced by Calcium, Zinc Organic stabilizer with the amount of chelating agent, lubricants and other internal and external components with the company's unique processing technology. The product contains the right amount of complex antioxidant system and other functional polymer additives, which can significantly increase finished goods' performance and improve the surface luster.
Introduce of the raw materials and their funcation for PVC foam board
2018 / 03 / 09
1.PVC resin SG-7,K 60, or SG-5 mix with SG-8 2.PVC stabilizer Lead based one pack PVC stabilizer or Ca/Zn stabilizer, Funcation:Prevent the heat decomposition of PVC resin. Help the product to form 3.Chemical Foaming agent AC blowing agent.NC blwing agent( white blowing agent), AC foaming agent belongs to the exothermic foaming agent, NC foaming agent belongs to the endothermic foaming agent 4.Foaming regulator Funcation: improve the melt strength of the melt and prevent the merger of the bubbles, so as to get the PVC foaming products with uniform foaming. At the same time, it can also promote the plasticization of PVC to ensure that the melt has good fluidity. 5.lubricants processing aid ACR175 Promoting plasticiation, stripping between materials and metals ,keep the material better fluidity 6.Lubtricant G60 It is internal lubricants promoting plasticization, improving polymer fluidity
Eco-friendly Pvc plasticizer "FAME"
2018 / 03 / 07
FAME is produced from vegetable oils, animal fats or waste cooking oils by transesterification. In the transesterification process a glyceride reacts with an alcohol in the presence of a catalyst, forming a mixture of fatty acids esters and an alcohol. Using triglycerides results in the production of glycerol. Transesterification is a reversible reaction and is carried out by mixing the reactants. A strong base or a strong acid can be used as a catalyst. At the industrial scale, sodium or potassium methanolate is mostly used. The following reaction occurs: The production of biodiesel is relatively simple from a technical standpoint, also allowing the construction of small decentralised production units without excessive extra costs. This limits the need to transport raw materials long distances and permits operations to start with modest-sized installations. Rapeseed, sunflower, soybean, palm oils, UCO and animal fat are the most common raw materials being used for the production of biodiesel. Using methanol in the transesterification process has the advantage that the resulting glycerol can be separated simultaneously during the transesterification process. When using ethanol during the process the ethanol needs to be free of water and the oil needs to have a low water content as well to achieve an easy glycerol separation. The end products of the transesterification process are raw biodiesel and raw glycerol. After a cleaning step biodiesel is produced. The purified glycerol can be used
Novista приняла участие на Выставке PLASTINDIA 2018
2018 / 03 / 07
Наша компания Novista участвовала в PLASTINDIA 2018 , Гандинагар-Ахмадабад, Гуджарат. Индия. . На Выставка к нам приехали много клиентов в Индии и за рубежом, включая торговцев добавок ПВХ, изготовителей ПВХ и отечественных изготовителей ПВХ. Посредством коммуникации и консультаций, клиенты имеют хороший интерес о наших продуктов. Некоторые из них достигли определенного намерения в отношении сотрудничества, мы продолжим общаться с данными потенциальными клиентами. Мы довольны результатом выставки. И мы с нетерпением ждем выставки Сhinaplas в 2018 году.
Brief introduction of Methyl Tin stabilizer
2018 / 03 / 06
Methyl tin stabilizer is an efficient stabilizer used in PVC hot working process. Its stability, transparency, compatibility and weather resistance are all superior to other organotin heat stabilizers. It is widely used in PVC sheet, panel, tubing and blow molding and injection molding products. It can also be used in food packaging, medicine packaging and non-toxic and harmless PVC products. Overseas, PVC products of various foods, medicine packaging and storage, and container and tubing for supplying drinking water with high requirements have all employed methyl tin as stabilizer. Its products boast pure color and luster, less odor vanishing fast and reliable safety performance. With the same effect, the using amount of methyl tin is reduced by 15-20% than that of other similar organotin stabilizers. Our company`s products have passed the ROHS certification.
Novista participated in the PLASTINDIA 2018
2018 / 03 / 02
Our company Novista participated in the PLASTINDIA 2018 FEB 7-12 2018, Gandhinagar- Ahmedabad, Gujarat. India. . The exhibition we received so many customers at home and abroad, including PVC additives traders, PVC manufacturers and domestic PVC manufacturers. Through the communication and consultation, these customers had a better understanding of our products. Some of them had reached some cooperation intention, we will continue to follow-up contact. We are satisfied with the result of this exhibition. At this time, our salesmen also took the initiative to go out looking for customers which is commendable. And we are looking forward to the arrival 2018 Chinaplas Exhibition.
Novista participated in the PLASTINDIA 2018
2018 / 03 / 02
Our company Novista participated in the PLASTINDIA 2018 FEB 7-12 2018, Gandhinagar- Ahmedabad, Gujarat. India. . The exhibition we received so many customers at home and abroad, including PVC additives traders, PVC manufacturers and domestic PVC manufacturers. Through the communication and consultation, these customers had a better understanding of our products. Some of them had reached some cooperation intention, we will continue to follow-up contact. We are satisfied with the result of this exhibition. At this time, our salesmen also took the initiative to go out looking for customers which is commendable. And we are looking forward to the arrival 2018 Chinaplas Exhibition.
Что входит в состав оконного профиля помимо ПВХ?
2018 / 02 / 28
Основным сырьем для изготовления оконного профиля служит поливинилхлорид. Кроме этого, в его состав входят различные добавки для придания пластику необходимых свойств. Именно благодаря специальным модификаторам, стабилизаторам, антиоксидантам и другим группам веществ пластик получает характеристики долговечности, прочности, сохранности формы и цвета. Все производители профиля является обладателями собственной уникальной рецептуры, которая является производственным секретом и строго охраняется. Однако, есть определенные соотношения, которых более или менее придерживаются все производители. Часто с целью снижения себестоимости производитель увеличивает массовую долю наполнителя в составе профиля - гидрофобного мела. Это самый дешевая составляющая и если его добавить достаточно много, то себестоимость станет закономерно ниже. Однако, чем больше в составе мела, тем более хрупким и менее долговечным станет профиль.
Novista will attend Chinaplas 2018
2018 / 02 / 28
Show Name : The 32nd International Exhibition on Plastics and Rubber Industries Date : April 24-27, 2018 Opening Hours : 09:30-17:30 Venue : National Exhibition and Convention Center, Hongqiao, Shanghai (NECC) (No.333 Songze Avenue Road, Qingpu District, Shanghai, PR China) Attender : Shandong Novista Chemical Co.,Ltd/Novista Group Co.,Ltd Booth No.: 8.2Q09 Welcome to visit and have a deep discussion at our booth. Business range : 1. Cpvc Resin/Compound 2. Tin stabilizer 3. Ca/Zn stabilizer 4. Lead stabilizer 5. Acrylic processing aid 6. Acrylic impact modifier 7. Chlorinated Polyethylene 8. other additives ( Pvc plasticizer, Pvc Lubricant etc) 9. Flame Retardant.
Welcome to visit Novista on Chinaplas 2018 in Shanghai!
2018 / 02 / 28
Chinaplas is an International Exhibition on Plastics and Rubber Industries. CHINAPLAS is not only the largest plastics and rubber trade fair in Asia, it is also widely recognized by the industry as the 2nd most influential exhibition in the world. You are sincerely invited to our Booth for Chinaplas 2018 by Novista Group. Infinite business opportunities and big surprises are waiting for you! Exhibits: chlorinated polyethelene, acrylic processing aid, heat stabilizer, Chlorinated Polyvinyl Chloride,flame retardant Date: 2018.4.24-27 Company name: Novista Group Co., Limited Booth Number: 8.2Q09. It would be a great pleasure to meet you at the exhibition. Hope we can create an opportunity to cooperate with you in near future.
Welcome to visit Novista on Chinaplas 2018 in Shanghai
2018 / 02 / 27
CHINAPLAS is an International Exhibition on Plastics and Rubber Industries. CHINAPLAS is not only the largest plastics and rubber trade fair in Asia, it is also widely recognized by the industry as the 2nd most influential exhibition in the world. You are sincerely invited to our Booth for Chinaplas 2018 by Novista Group. Infinite business opportunity and big surprise are waiting for you! Exhibits: Chlorinated polyethelene, Acrylic processing aid, Heat stabilizer, Chlorinated Polyvinyl Chloride, Flame retardant Date: 2018.4.24-27 Company name: Novista Group Co., Limited Booth Number: 8.2Q09. It would be a great pleasure to meet you at the exhibition. Hope we can create an opportunity to cooperate with you in near future.
Send Inquiry
Mr. Ron Han
Tel:86-536-8206760
Fax:86-536-8206750
Mobile Phone:+8615336365800
Email:manager.han@novistagroup.com
Address:RM1232-1233,#4 Building No.4778 Shengli East Street, Weifang, Shandong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.